Vaastu Advice for Plastic Industry

Vastu is defined as an art of balancing the man-made environment with the God gifted nature. It works on the principle of five universal elements that govern all the natural as well as man-made forces. The five elements of air, water, earth, space, and fire interplay with each other to maintain a perfect equilibrium in the universe. This in turn affects human life and influences all our deeds, behavioral patterns, emotions, and moves.

In its early stage of introduction, vastu was believed to be connected to the architectural science with regards to construction, placement, positioning, and establishment. In this form of science it is known to combine the powers of all existing energies and forces including the solar energy, lunar energy, thermal energy, wind energy, electric energy, and cosmic energy to create the most fulfilling atmosphere.

The same formula applies to the art of building a plastic industry. Plastic is certainly one of the most wanted materials and the greatest necessity of life in the present day world. If you look around and take a glare of the surroundings, you’ll find a good number of articles infused with plastic in some or the other form. This high demand and heavy requirement has dramatically increased the demand of plastic production, thereby increasing the number of manufacturing units. However, there are many such units that exclusively manufacturer plastics but only a couple of them are able to reach the zenith of success. The success enjoyed by few is mainly due to the unbound powers of vastu.

There are many construction and placement defects that often hamper the operation and success of a production unit. This leads to failure of many plastic industries but sadly some still don’t get to see the truth of this ancient science. It’s time for all to wake up and see the powerful forces of vastu interplaying with each other to witness smoother operation and higher gains. If plastic is an integral part of this world, then vastu should certainly be at the forefront of constructing the industry layout.

Some of the most effectual vastu advices for plastic industry are:

The main building should be constructed in the South West area of the plot.
The North and the East portions should have open spaces.
Polymer mixing, liquefaction, and other important plastic making processes should be carried in the South direction or the South East corner. This means that the main production machinery should be placed in the South or the South East.
Arrangements should be made to ensure that the liquid plastic released from the machinery flows from South to North.
Storage room for raw materials and other goods should be constructed in the South West zone.
The research and development department should be placed in the North East direction.
The exit gate or the delivery gate should ideally be in the North West direction.